Salicru SPS 2000 ADV T B1 Line-interactive sine-wave Uninterruptible Power Systems (UPS) tower
00260-HW-SAL-060
Overview
The Salicru SPS 2000 ADVANCE T B1 – 2000 VA Line-Interactive Sine-Wave Uninterruptible Power Supply (UPS) Tower is a high-capacity, reliable power protection system designed to safeguard computer rooms, servers, and critical IT infrastructure. Utilizing line-interactive technology with Automatic Voltage Regulation (AVR), it stabilizes voltage fluctuations while providing a pure sine-wave output, ensuring compatibility with sensitive and high-demand electronic devices.
| TECHNOLOGY | Line-interactive |
| FORMAT | Tower |
| Rated voltage | 230 V |
| Voltage range 100% load | 165 ÷ 290 V |
| Stabiliser | AVR (Buck & Boost) |
| Rated frequency | 50 / 60 Hz (auto-detection) |
| Frequency range | ±5 Hz |
| Auto~detection of frequency | Yes |
| Protection | Resettable breaker |
| Rated voltage | 230 V |
| Voltage accuracy (battery mode) | ±10% |
| Power (VA/W) | 2000 / 1800 |
| Total harmonic distortion (THDv | <5% |
| Waveform (battery mode) | Pure sine wave |
| Frequency | 50/60 Hz (same as input) |
| Frequency accuracy (battery mode) | ±1 Hz |
| Compatibility with APFC loads | Yes (1) |
| Performance Stabiliser mode (AVR) | >92% |
| Performance Battery mode | >80% |
| Admissible overloads in battery mode | 110% for 1 min / >130% immediate |
| Admissible overloads in-line mode | 110% 1min / 120% immediate |
| Socket type | IEC C13 |
| No. Of sockets | 6 |
| Battery type | Not included, Pb-Ca sealed, AGM, maintenance-free |
| Charge type | I/U (constant current/constant voltage) |
| Recharge time | 4 hours to 90% |
| Battery test | Automatic on each start-up + manual |
| Ports | RS-232 / USB (HID) |
| Intelligent slot | Slot for SNMP/potential-free contacts/ MODBUS |
| Monitoring software | For Windows, Linux and Mac |
| Type | LCD + keypad |
| Values | Input and output voltage / % load / % battery / backup |
| Levels | Connected load / overload / battery / low battery |
| Operating modes | Normal / Stabilisation (AVR) / Battery / Fault |
| Alarm | Battery / low battery / overload / failure |
| Audible | Every 30 s for battery operation. Every 2 s for low battery / Polarity. Every 0,5 s for overcharge. Continuous for fault. |
| Failure | Display LCD |
| Cold start (start-up from batteries) | Yes |
| Emergency stop (EPO) | Yes |
| Operating temperature | 0º C ÷ 40º C |
| Relative humidity | Up to 95%, non-condensing |
| Maxium operating altitude | 2,400 masl |
| Acoustic noise at 1 metre | <45 dB (2) |
| Safety | EN-IEC 62040-1 |
| Electromagnetic compatibility (EMC) | EN 62040-2 |
| Operation | EN 62040-3 |
| Corporate cerification | ISO 9001, ISO 14001, ISO 45001 |
| Depth (mm) | 327 |
| Width (mm) | 140 |
| Height (mm) | 191 |
| Weight (kg) | 12.2 |
With a 2000 VA capacity, this UPS supports medium to large IT environments, networking devices, and professional workstations, delivering uninterrupted power to prevent data loss, downtime, and hardware damage. Its tower design enables easy placement in office or technical environments without complex installation, while advanced surge protection and intelligent battery management extend battery life and enhance equipment safety.