CFCS-2 CHEM-FEED® Compact Duplex Skid System

Specifications

Skid

• Chemically resistant polyethylene structure.
• Welded joint construction

Pump (sold separately)

• FLEXFLO® A1/M1, M1/M2, A3/M3 or A4/M4 peristaltic pumps
• CHEM-FEED® CD1/MD1, C2, C3, or CD3/MD3 diaphragm pumps

Piping

• PVC Schedule 80 (optional CPVC)

Seals

• FKM (optional EPDM)

Tubing (T)

• Reinforced braided 1/2” PVC, 200 psi max, certified NSF 51 / NSF 61, or 1/2” PTFE, or 1/4” PE, or 1/4” PTFE.
• The pump inlet and outlet flexible tubing connections are terminated base on type of pump provied. Refer to Adapter Kits sheet 85000-198.

Tubing Clamps

• 300 series SS band, 400 series SS screw

Unions (U)

• PVC body, schedule 80 (CPVC optional)

Ball Valves (V)

• Vented ball, True unions, PVC body, PTFE shaft bearings and seats (CPVC optional)

Pressure Relief Valve (PRV)

• PVC body, PTFE primary diaphragm seal. Non-wetted components: EPDM secondary seal, zinc plated steel spring, stainless steel external hardware, HDPE pressure adjusting screw and locknut. Infinite adjustment from 10-150 psi.
• Maximum inlet pressure 150 psi. (CPVC optional)

Calibration Cylinder (CC)

• PVC body, PVC end caps, 1/2” ID PVC pipe outlet vent.
• Available volumes: 3 GPH (100ml), 8 GPH (250ml), 16 GPH (500ml), 32 GPH (1000ml). 64 GPH (2000ml). (Glass optional – except 2000ml)

Pulsation Dampener (PD)

• CPVC body,10 cubic inch volume, FKM bladder (optional EPDM bladder)

Gauge W/Guard (G)

• Gauge: liquid filled stainless steel with blowout plug, bottom mount, 1/4”
• NPT threads. Available pressure ranges: 0-30 psi, 0-100, psi, 0-200 psi.
• Guard: PVC body w/union, PTFE diaphragm seal, temperature compensated oil filled.

Check Valve (CV)

• PVC body, FKM diaphragm (optional EPDM). Cracking pressure: 1.0-1.5 psi.
• Maximum working pressure: inlet = 150 psi, back = 100 psi. (CPVC optional)

Flow Indicator (F)

• Machined cast acrylic, PVC or CPVC connections, ceramic ball, PVDF ball stop, Polypro half unions.

Y Strainer (S)

• PVC body (CPVC optional)

Universal Mounting Blocks

• PA12

Pump Extended Mounting Brackets (not included)

• 316 Stainless Steel

Skid Mounting Foot Pads

• 316 Stainless Steel

Mounting Hardware

• 18-8 Stainless Steel

Drip Containment

• Integral – 1” deep – 1.8 gallons ( 6.8 L) total containment

Maximum Working Pressure

• 150 psig (10.3 bar)

Operating Temperature

• 14 °F to 115 °F (-10 °C to 46 °C)

Approximate Shipping Weight

• 100 lb. (45.35 Kg)