NANOXL Conductivity Controller
08505-HW-ADV-0505
Overview
The NANO-XL Controller is designed to monitor conductivity and control chemical feed operations in water treatment systems. It provides precise, reliable control through four independent relay outputs, each configurable to activate based on sensor input, pulse timers, 28-day timers, recycle timers, alarms, or utility signals.
Specifications
Electrical Input 95-240 VAC, 50/60 Hz
Relay Outputs Individually fused and 2.5 amps Dry contact limited to 2.5 mA at 28 VDC
Display LCD 1 x 16 backlit alphanumeric
Digital Inputs Inputs have 10K Ω pullup to 3.3 VDC from open collector open drain output
Flow Totalizing Inputs 10K Ω pullup to 5 VDC max rate 2.5 KHz from open collector open drain output
mA Inputs Optical isolation, 250 Ω / 5 VDC @ 20 mA Loop voltage to not exceed 30 VDC
mA Outputs Non-isolated. 12 VDC max load = 400 Ω Isolated ext 24 VDC max load = 800 Ω
Enclosure NEMA 4X style polycarbonate
Ambient Temp 0° to 125°F (-17° to 52°C)
Relative Humidity 0 to 100%
Shipping Weight Approximately 6 lbs. (2.722 kg)
Dimensions 11” (27.94cm) W x 11.75” (29.84 cm) H
Built for simplicity and efficiency, the NANO-XL features a step-through menu and LCD display for easy setup and operation. Its compact, prewired design simplifies installation, while non-volatile memory ensures settings are retained during power loss.